Please Note: We try to provide every kind of tips and secrets related to various Siemens Mobile. All these Secrets are taken from trusted sources and we have also tested many of them but still we can’t guarantee if they will work properly for you. Feel free to take these tips and try on your own risk. We won’t be held responsible for any damages caused to your mobile phone. Hopefully nothing such will happen

Siemens S3 comfort:

Show IMEI code: * # 06 #

MONITOR MODE:

The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.

TO ACTIVATE MONITOR MODE:

1. Turn the phone on.

2. Enter the PIN access code on press OK. (Only if is enabled).

3. Press Menu. (Left top button).

4. Press 9. (Phone Options).

5. Press 8. (Phone Status) (May be button 7 in some phones).

6. You may see your IMEI Number

7. Left Display Button (Top left MENU key).

8. 7684666

9. HangUp Button. (Red HandSet key).

Note: Monitor should appear now at the bottom of the Network Options menu.

MONITOR MODE TOGGLE:

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Tips and tricks:

Nice Sunset in the display. Siemens S3 or younger

In the Telephone Book in the section own numbers, first position you have to type in +12022243121 (Number of the Capitol in Washington DC) and save it without a name. Then open this telephone book again do so as you like to change the number but leave the modus without changing anything. A nice Sundown will be shown in the display.

Pin Out:

1- GND

2- SB

3- POWER

4- NC

5- TX

6- RX

7- CLOCK

8- DATA

9- GND MIC

10- HF MIC

11- AUDIO

12- GND AUDIO