We try to provide every kind of tips of secrets related to various models of Nokia Mobile. All these Secrets are taken from trusted sources and we have also tested many of them but still we can’t guarantee if they will work properly for you. Feel free to take these tips and try on your own risk. We won’t be held responsible for any damages caused to your mobile phone. Hopefully nothing such will happen !!!

Nokia 2160 Mobile Secrets:

The Nokia 2160 series hand portable CMT uses an EEPROM NAM that can be programmed directly from the standard user keypad. In order to access the NAM, you must enter the special access code currently programmed into the phone. Once the programming mode is accessed, NAM parameters are loaded by entering them into the display and “storing” them to selected memory locations. Be sure to obtain all parameters before proceeding.

EASY NAM PROGRAMMING:

1. Turn on phone.

2. Enter the Easy NAM access code. Access code is: *#639#

3. Verify the display now reads “Cellular Number” and enter the 10 digit MIN for the phone.

4. Press the softkey under the word “OK” in the display. If less than 10 digits are entered an error message will prompt you to reenter the number.

5. Verify the display reads “Enter code” and enter the five digit SID followed by four zeros. (Example 001750000 is a SID of 175 followed by four zeros). An error message will display if an incorrect entry is made. Do not add more than four zeros to the code.

Note: Change the Lock code by adding a pound sign and new lock code after the code. (Example: 001750000#7788. Lock code = 7788).

Change the Language code by adding a pound sign (#) and new language code after the code. (Example: 001750000#2. Language = 2)

Language Code: 0 (default) = English, 1 = French, 2 = Spanish, 3 = Portuguese

Change the Lock code and Language code by separating each set of numbers by a pound sign. (Example: 001750000#7788#2). The SID = 00175, Lock code = 7788, Language = 2 (Spanish).

6. Press the softkey under the word “OK” in the display.

7. The display will tell you that the activation was OK and instruct you to power the phone off, then on again. When the phone powers back up, it will automatically select the correct system (A or B).

xxxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxxxxxx

Nokia 2160 Model Secrets:

Access Nam Programming Mode:

1. Turn the phone on.

2. Enter the NAM access code. Factory default is: *3001#12345

3. Enter softkey [MENU].

4. If this screen appears, you have entered the access code correctly:

| Field Test | | >NAM 1 | | NAM 2 | SELECTION FROM THE MAIN LEVEL MENU (FIRST LEVEL OF NAM MENU):

5. Press the scroll key up or down repeatedly until the desired main menu selection is displayed. Select from:

NAM 1 NAM 2 NAM 3

Serial No. Programmed Field Test

Security Code Emergency Number SW Version

6. Press softkey [SELECT] to access the second level menu for your main menu selection.

PROGRAMMING NAM’s 1 THROUGH 3 (SECOND LEVEL OF NAM MENU):

7. Press the key up or down to scroll through the selected NAM information list. Select from:

HOME SYSTEM OWN NUMBER PSID/RSID LISTS (Note 1) CHANGE DEFAULTS

“CHANGE DEFAULTS”

NAM STATUS ACCESS METHOD LOCAL OPTION PRIMARY PAGING CH

SECONDARY PAGING CH DEDICATED CCH A DEDICATED CCH A NBR DEDICATED CCH B DEDICATED CCH B NBR OVERLOAD CLASS GROUP ID ROAMING STATUS A-KEY

8. If the value is incorrect, press softkey [SELECT] and use the numeric keypad or key to make any needed changes.

9. Enter softkey [OK] to save the value.

10. Repeat steps 7 through 9 for the remaining NAM info items to be viewed and/or changed.

11. To program other NAM’s, press [QUIT] to return to the Main Level Menu list. Select NAM 2 or NAM 3. Once the Home System ID and Own number are programmed, the phone will automatically set the NAM Status to enabled.

PROGRAMMING THE SECURITY CODE:

12. From Main Level Menu use the key to select the “Security” menu, press [SELECT] and the current 5-digit security code will appear in the display. Default is 12345.

13. If you wish to change the Security code at this time, use the numeric keys to change the value.

14. Press the softkey [OK] to store changes.

PROGRAMMING EMERGENCY NUMBERS:

15. From Main Level Menu use the scroll key to select the “Emergency” menu. Press softkey [SELECT] to enter the emergency numbers.

EMERGENCY NUMBER 1 (911) EMERGENCY NUMBER 2 (*911)

EMERGENCY NUMBER 3 (None)

16. If you wish to change the displayed value, use the numeric keys to make changes. Use the scroll key to select the emergency number you wish to change and press [SELECT].

17. To save the value, press softkey [OK].

18. Press [QUIT] to exit the menu.

SW VERSION:

19. From the Main Level Menu use the scroll key to display the “SW version” menu, press [SELECT] to view software version, date and product type.

20. Press [QUIT] to exit the menu.

SERIAL NUMBER (ESN):

21. From the Main Level Menu, use the scroll key to display the “Serial No.” or ESN of the phone.

22. Press [QUIT] to exit the menu.

PROGRAMMED: (DATE THE PHONE IS FIRST PROGRAMMED)

23. From the Main Level Menu, use the key to display the “Programmed” menu.

24. Press [SELECT] and enter a four digit number that corresponds to the month and year the phone is sold. Example (mmyy) 0197 = January 1997, 0996 = September 1996.

Note: This menu location can be programmed only one time. Once the date has been entered it cannot be changed. Any attempt to enter the menu once it has been programmed will receive a short beep and the message “DATE ALREADY STORED”.

EXITING NAM PROGRAMMING:

25. To exit the NAM programming mode, turn the phone off and leave it off for five seconds.

We try to provide every kind of tips of secrets related to various models of Nokia Mobile. All these Secrets are taken from trusted sources and we have also tested many of them but still we can’t guarantee if they will work properly for you. Feel free to take these tips and try on your own risk. We won’t be held responsible for any damages caused to your mobile phone. Hopefully nothing such will happen !!!

Nokia 1610 / 1611:

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#170602112302# shows the SW version.

Latest software version on Nokia 1610: v 5.15 (25.02.97) NHE-5NX – older version V 4.19

Latest software version on Nokia 1611: V 4.03 NHE-5SX

xxxxxxxxxxxx Finish xxxxxxxxxxx

Nokia 2010 Model Secrets:

To view IMEI number *#06#

To view Software Version enter *#9999#

xxxxxxxxxxxx Finish xxxxxxxxxxx

Nokia 101 cell phone Lockcode:

Nokia 101 cell phones set up by Bell Mobility in Toronto can have their lock code circumvented by the following method:

Type: * 3001 # 12345 [STO] 00

Wait for: NOT DONE

Type: [RCL] 01

Clear old lock code (the last four digits) and enter a new lock code. Be very careful not to delete other characters.

Type: [STO] 01 [STO]

Turn power off.

xxxxxxxxxxxx Finish xxxxxxxxxxx

Nokia 2110i Model Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

To view Week and Year of manufacture enter *#3283# [*# D A T E #]

The last two digits are the year. If the year is 95, the first two digits are the month. For 96 the first two digits are the week of the year.

To view the software version on 2110e / 2110i enter *#170602112302# or *#9999#

On newer phones, the code has been changed to *#682371158412125#

Service Prover Lock:

The service provider (SP) lock is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:

#pw+(master code)+Y#

This code is able to check, activate or remove Sim card restriction (SP-lock).

Use the * key to get the p, + and w chars.

‘Y’ has to be 1,2,3 or 4 – depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status

#pw+1234567890+2# for Network-Lock status

#pw+1234567890+3# for Country-Lock status

#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS

W = PRESS “*” THREE TIMES

P = PRESS “*” FOUR TIMES

+ = PRESS “*” TWO TIMES

MASTERCODE = 1234567890

Y = NUMBER 1 TO 4

xxxxxxxxxxxx Finish xxxxxxxxxxxxx

Nokia 2110i Model Secrets:

(master code) is a 10 digit code, based on the phones IMEI number.

(I can NOT give you the master code – SO DON’T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:

#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)

eg. To check if phone if restricted on lock 1 type the following code:

#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it’s only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

Bypass the SP lock

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:

1: Insert sim card of diferent provider.

2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE?

3: Press the “C” key.

4: Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again. NOTE: On version 5.04 Nokia has removed this option !

Cell-sites:

To enable display of cell-site names, [MENU] 4 9 1

Received calls:

To see received calls. Same As menu options (012)

Enter : * then Memory then Find or * then the down arrow Missed calls

To see missed calls:

Same as menu option (01 3)

Enter : + then Memory then Find or + then the down arrow

DTMF tones:

Pressing Menu, then Green Phonebutton allows you to transmitt DTMF tones

Carkit Programming:

If you use a carkit with handsfree AND additional handset, and you want to switch from handset to handsfree: Press the left menu button, and put the additional handset on hook. Now you are on handsfree