Free Mobile Resource » Nokia Secrets

Nokia Mobile Secrets

admin — Fri, 04 Jul 2008 13:45:59 +0000

Please Note: We try to provide every kind of tips of secrets related to various models of Nokia Mobile. All these Secrets are taken from trusted sources and we have also tested many of them but still we can’t guarantee if they will work properly for you. Feel free to take these tips and try on your own risk. We won’t be held responsible for any damages caused to your mobile phone. Hopefully nothing such will happen

Nokia 8810 Secrets:

IMEI number:

*#06#

Software Version:

*#0000#

1st Line – Software Version

2nd Line – Date of Software release

3rd Line – Phone Type.

Serial Number:

*#92702689#

1st Screen – Date of phone manufacture

2nd Screen – Serial #, IMEI

3rd Screen – Purchasing date

4th Screen – Last Repair Date.

xxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxx

Nokia 8850 Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# To view Software Version.

Latest software version: V 5.11 09-12-99 NSM-2

Older version: V5.08

xxxxxxxxxxxx Finish xxxxxxxxxxxxxx

Nokia 9000/9000i Secrets:

To view IMEI number *#06#

To view Software Version enter *#8110# Latest Version is under Phone Info.

To view Week and Year of manufacture enter *#3283#

xxxxxxxxxxxx Finish xxxxxxxxxxxxxx

Nokia 9110 Secrets And Tips:

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# shows the SW version.

Latest software version: V 5.06 (09.12.99) RAE-2

V 5.02 (26-08-99)RAE-2

V 4.05 RAE-2

Free SMS Tip:

1st Way:

1. turn our phone off.

2. turn it on and enter your pin.

3. enter *#746025625# 4. now “SIM CLOCK STOP ALLOWED” will be displayed.

now you can send SMS for free. if you turn your phone off and later on you have to reenter this code!!!

In some Networks it doesn’t work!!!

2nd Way:

Set Menu 4-3-3 on Usergroup 666 (work with German Networks)

xxxxxxxxxxxx Finish xxxxxxxxxxxxxx

Nokia N201 Secrets:

Nokia N201 Cellular Telephone

(170-1499) Programming

1. Turn on phone.

2. Enter *3001#12345.

3. Enter [STO]00. Display says STORE NOT DONE. If it says “NOT ALLOWED”, re-enter.

4. Press and hold [CLR] until display clears.

5. Enter NAM parameters in 1 long string — 911#*911#0*1234 — lock code is 1234, language code is 0.

6. Enter [STO]01[STO].

7. Press and hold [CLR] until display clears.

8. Enter the 10 digit phone number.

9. If desired, press [ALPHA] key and enter a name of up to 16 characters. The zero key can be used to enter a blank space. After the name is entered, press [ALPHA] 10. For Primary NAM enter [STO] 02 [STO]. For Optional NAM enter [STO] 04 [STO].

10. Press and hold [CLR] until display clears.

11. Enter the system parameters in a single string — 00038*1*1*334*05*10.

12. For Primary Nam, press [STO] 03 [STO]. For Optional Nam press [STO] 05 [STO].

13. Press and hold [CLR] until the display clears.

14. Press [RCL] followed by one of the memory locations from above (01 through 05).

15. Verify the information is correct.

16. Power off. Power back on. If NAM ERROR or NO SVC appears (and service is activated) the programming must be repeated.

Share this post: Share this post with the world.

Nokia 8110i Secrets

admin — Fri, 04 Jul 2008 13:39:04 +0000

Nokia 8110i Mobile Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

*#8110# for checking the phones software (SW) – called firmware revision information.

#746025625# [*#sim0clock#]

Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn’t work with software version 4.59.

*#92702689# [*#war0anty#]

Phone asks ‘warranty code:’

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture (0997)

7332 (OK) : Displays the date of the last repairment – if found (’DATE NOT SAVED’…)

7832 (OK) : Displays (if found) the date where the phone was purchased (’DATE NOT SAVED’…)

9268 (OK) : Displays Serial Number

37832 (OK) : Set the Purchasing Date MMYY

(Warning: You can only do this once – So be careful what you write…)

87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another (eg. if broken) with 6110 u can transfer all data via IRport. (Confirm transfer?)

Software:

8110i : Type NHE-6BM

8110 : Type NHE-6BX

8110i SW Versions:

LATEST Version is V 5.20 xx-xx-9x

Software version V 25.10 03-06-98

- An updated GSM operators’ list.

- The two hands at startup has been removed (Can anyone tell me what Nokia is trying to say with this startup-screen ping-pong?!).

Software version V 25.00 12-02-98

- An updated GSM operators’ list.

- Tingtone 10 was changed.

Software version V 34.23 22-10-97

(hummm…only one day from the older version!!!!!!??)

- Latest known version.

- An updated GSM operators’ list.

- Some character changes (eg. the @) when sending sms.)

Software version V 24.23 21-10-97

- An updated GSM operators’ list.

- The two hands at startup is back!! (if they were gone at all)

Software version V 24.11 09-09-97

- An updated GSM operators’ list.

- Some people say that the two hands at startup has been removed – some don’t !

Software version V 24.04 08-08-97

- An updated GSM operators’ list.

- Problem with missing service provider name in display solved.

Software version V 24.03 16-07-97

- First known version.

- This version had some problems showing the service provider in the display. Instead it showed some empty space. ???

This is what the Nokia 8110(i) displays when software code is typed.

V 04.51

26-03-98

NHE-6BM

xxxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxx

Nokia 8110i Nokia Secrets And Tips:

First line:

The Software Version (My guess is that this software has been used in previously Nokia-phones, what do you say?!).

Second line:

The date of the SW release.

Third line:

NHE-8 has something to do with the type of phone you are dealing with. Is it GSM 900 (standard), GSM 1800 (DCS1800) or GSM 1900 (PCS1900)? Nokia 2110, 3110, 8110(i) are all NHE types. The only thing that vary is the code after NHE- (”8″). NHE = GSM 900, NHK =GSM 1800 – The number in the end = the model (2110i = 4 etc.) The 5110 and 6110 is called NSE-1 and NSE-3…this may be because it supports EFR (?)

Software update, how?

I have been asked a lot about how to update the software in your cell phones. The easiest thing to do is to go to the nearest Nokia dealer and make him do it for you. Just remember that it is supposed to be free (a receipt is requiet) so don’t let him tell you anything else!

Service Provider Lock:

The service provider (SP) lock is used to lock the cell phone to the SP’s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:

#pw+(master code)+Y#

This code is able to check, activate or remove Sim card restriction (SP-lock).

Use the * key to get the p, + and w chars.

‘Y’ has to be 1,2,3 or 4 – depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status

#pw+1234567890+2# for Network-Lock status

#pw+1234567890+3# for Country-Lock status

#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS

W = PRESS “*” THREE TIMES

P = PRESS “*” FOUR TIMES

+ = PRESS “*” TWO TIMES

MASTERCODE = 1234567890

Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.

(I can NOT give you the master code – SO DON’T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:

#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)

eg. To check if phone if restricted on lock 1 type the following code:

#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it’s only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

xxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxxxx

Nokia 8110i Model Tips And Tricks:

Bypass the SP lock:

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:

1: Insert sim card of diferent provider.

2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE?

3: Press the “C” key.

4: Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again. NOTE: On version 5.04 Nokia has removed this option !

The 54# Tip:

Type 1#, 2#……..54# on the keypad (when you’re not in the menu) to get the phone number used for with thiskey when speed dialing.

Update from 8110 >8110i impossible….

Even though NHE-6 is found on the bagside of 8110 too an update from that phone to the 8110i is impossible. The reason is simple. The hardware is different which means that the SW capacity in 8110i is bigger than the 8110.

Original Ringtone:

If you want the original ringtone back after you have downloaded one you can send a message to yourself containing the text: //SCKL1581 After some time you will recieive a message that you can save, and your original Nokia ringtone is back.

What’s a Business Card?

A business card is a special SMS message which is composed as following: //SCKE2 BEGIN:VCARD N:name TEL:number END:VCARD

Hands Free tip:

To continue an existing call when placing the 8110i into the hands free car kit without it dropping the call, press the Memory button just before connecting the cable and placing it in the cradle.

Display extra text in call costs feature tip:

If your network operator doesn’t offer a call costs service, you can still make use of that function to display some personalized text on the screen of your 8110i. Go to Menu, [5], [7], [1], enter PIN2-code and choose Set. Then type in the limit of the currency units you’re using (if the call cost service worked, you would have to type the cost limit of the calls) and choose OK. In this case I typed 8110. Then go to the next submenu (Menu, [5], [7], [2]), the Show costs in menu. Type in the PIN2 code again and select Currency. Type in the unit price, in this case number 1. Then type the name of the currency – you can use any string of letters and numbers 1-3 characters long. then type 2 letter then to confirm type two names begining with one of each of the letters. Then press OK to confirm it.

Quick saving while in call tip:

Saving numbers to memory during a call If you type a number into your phone during a call, you will lose it when the call ends. To prevent this happening just hold down Memory button — the number will be saved (with no name) to the next available memory location.

Deleting SMS messages quickly tip:

When reading an SMS message, instead of pressing Option, Erase to delete the message, simply press [C].

Turning lights on temporarily tip:

If you have display lights turned off, you can turn them on by quickly pressing and releasing the power button. They will stay on as long as you are pressing button.

Silent mode temporarily tip:

You can put your phone into silent ringing mode temporarily by pressing Menu then [#].

Closing the cover without ending a call tip:

If you press the menu key and then close the sliding cover during a call you will not end your call.

Turning lights on temporarily tip:

If you have lights turned off you can turn them on by quickly pressing and releasing the power button . They will stay on as long as You’re pressing the button.

This works also in Nokia 3110. Lights will go off after a couple of seconds if no button pressing

Thats all about Nokia Mobile 8119i Secrets

Share this post: Share this post with the world.

Nokia 8110 Secrets

admin — Fri, 04 Jul 2008 13:02:11 +0000

Nokia 8110 Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]

Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn’t work with software version 4.59.

*#92702689# [*#war0anty#]

You don’t need the warranty-codes any more – you can just scroll through the information like in any other menu. It has the the same data as 81xx and 31xx phones (with “Edit” button for purchase date, and “User data transfer”).

Menu:

1: Displays Serial Number.

2: Displays the Month and Year of Manufacture (0997)

3: Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date (Warning: You can only do this once – so be careful what you write…)

4: Displays the date of the last repairment – if found (0000)

6: Does anyone know if this is for upgrading the phone’s EEPROM?? (Transfer user data?)

Software:

Type: NSE-6

LASTEST Version V 5.00 (29-09-99)

Older versions:

V 4.05 NSE-6 (26-11-98)

V 4.01 NSE-6

V 3.01 NSE-6 (08-07-98) First version!

This is what the Nokia 8810 displays when software code is typed.

V 04.05

26-11-98

NSE-6

First line:

The Software Version (My guess is that this software has been used in previously Nokia-phones, what do you say?!).

Second line:

The date of the SW release.

Thanks For Your Time

Share this post: Share this post with the world.

Nokia Mobile Secrets

admin — Fri, 04 Jul 2008 12:47:37 +0000

Nokia 6120 / 6160 / 6162 (TDMA phones):

*#92772689# for checking ISDN number.

*3001#12345# for field test mode and nam selection and some other stuff…

*#9999# shows the SW version.

Nokia 6150 Mobile Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# shows the SW version.

*#92702689# to enter service menu.

Latest software version 5.22 (10-11-99) NSM-1

Older versions:

5.20 (20-09-99) NSM-1

5.17 (01-07-99) NSM-1

Updates:

1. Updated GSM-list

2. *4720# and #4720# (activate/deactivate Half rate) doesn’t work anymore!

3. New menu option: 4-4-6 Confirm SIM service actions Lets you select whether SIM service actions are visible and confirmed by you.

4. Automatic menu-language selection doesn’t work anymore!

V 5.02 (02-02-99) NSM-1

V 4.13 NSM-1 (EFR option should be back in this version)

V 4.12 NSM-1 (EFR option removed in this version)

V 4.11 NSM-1 (EFR option removed in this version)

V 4.02 NSM-1

Nokia 6190 Mobile Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#6190# shows the SW version.

*#92772689# (after removing the analog module) shows service menu.

*3001#12345[OK] to enter test mode.

*#639# to change NAM.

Nokia 7110 Mobile Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# To view Software Version.

*#3370# – Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

*#3370* – Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*#4720# – Half Rate Codec activation. It will automatically restart

*#4720* – Half Rate Codec deactivation. It will automatically restart

*#746025625# – Sim clock allowed status.

*#92702689# [*#war0anty#] – takes you to a secret menu with 6 choices:

1. Displays Serial Number.

2. Displays the Month and Year of Manufacture (0997)

3. Displays (if there) the date where the phone was purchased (MMYY)

4. Displays the date of the last repaired – if found (0000)

5. makes you capable of transferring user data if you have the gear for it

6. shows how many hours the phone has been on

Latest software version: 4.77 25-01-00 NSE-5 – EFR and half rate codes do not work with this version.

V 4.76 13-01-00 NSE-5

V 4.75 07-01-00 NSE-5

V 4.73 15.11.99 NSE-5

Thanks

Share this post: Share this post with the world.

Nokia 6110 Secrets

admin — Fri, 04 Jul 2008 12:07:55 +0000

Nokia 6110 Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

*#0000# To view Software Version.

*#6110# Try this code if the above code doesn’t work.

#746025625# [*#SIM0clock#]

Checks if the SIM clock can be stopped. SIM clock stop is a kind of stand-by mode which will save battery time. This code doesn’t work with software version 4.59.

*#92702689# [*#war0anty#] You don’t need the warranty-codes any more – you can just scroll through the information like in any other menu. It has the same data as 81xx and 31xx phones (with “Edit” button for purchase date, and “User data transfer”). Menu:

1: Displays Serial Number.

2: Displays the Month and Year of Manufacture (0997)

3: Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date (Warning: You can only do this once – so be careful what you write…)

4: Displays the date of the last repaired – if found (0000)

6: Does anyone know if this is for upgrading the phone’s EEPROM?? (Transfer user data?)

Enhanced Full Rate Codec (EFR):

On: Enter *3370# and EFR will be activated after a reboot of the phone ( consumes more power )

Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:

On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone ( better standby time )

Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the phone

Network Monitor:

There is a hidden menu inside your Nokia phone. If you want to activate it, you’ll have to re-program some chips inside of your phone.

1.Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.

2.Take apart the phone.

3. De-solder the EEPROM (ATMEL AT 24C64).

4. Read out the data with an EEPROM programmer and save it to a file (Backup).

5. If you have v.33 or v4.73, change the address “03B8″ from “00″ to “FF”.

6. If you have v5.24 then change the address “0378″ from “00″ to “FF”.

7. Write the new data to the EEPROM and solder it back to the phone.

8. Power on your phone and you should have “Net monitor” enabled.

The Network Monitor gives you the following information.

Carrier number

MS RX Level in DBM

Received signal quality

MS TX power level C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.

RTL (Radio link timeout).

Timeslot

Indication of the transmitter status

Information on the Network parameters.

TMSI (Temporary Mobile Subscriber Identity).

Cell identification (Cell ID, Number of cells being used).

MCC (Mobile country code)

MCN (Mobile network code)

LAC (Location area code)

Ciphering (On/Off)

Hopping (On/Off)

DTX (On/Off)

xxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxxxxx

Nokia 6110 Secrets:

Discard cell barred information.

The Reboot Trick:

Should work on all software versions.

1. Go to calendar (menu – 8 )

2. Make note / reminder

3. Enter some text into the edit box

4. Hold clear until whole text is cleared, then press Back

5. Press 0. Main screen is shown but a space appears on the screen. You can’t see it of course.

6. Enter 4 digits (1234, for example)

7. Use the down arrow to move the cursor to the left side of the numbers and the space (2 times down arrow)

8. Now enter 6 digits and press the green “Call button”.

Wait some seconds…the phone will now flash the background light and finally reboot. The trick should also work on other menus like the profile menu…

The James Bond Trick:

If you short-circuit the left middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile “Headset” will be activated. Before you do this just activate the “Automatic Answer” in the headset profile and set the ringing volume to “Mute”. Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

Service Provider Lock:

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:

#pw+(master code)+Y#

This code is able to check, activate or remove SIM card restriction (SP-lock).

Use the * key to get the p, + and w chars.

‘Y’ has to be 1,2,3 or 4 – depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status

#pw+1234567890+2# for Network-Lock status

#pw+1234567890+3# for Country-Lock status

#pw+1234567890+4# for SIM Card-Lock status

# = DOUBLE-CROSS

W = PRESS “*” THREE TIMES

P = PRESS “*” FOUR TIMES

+ = PRESS “*” TWO TIMES

MASTERCODE = 1234567890

Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.

(I can NOT give you the master code – SO DON’T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:

#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)

eg. To check if phone if restricted on lock 1 type the following code:

#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it’s only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

xxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxxxxx

Nokia 6110 Secrets And Tips:

Power Button Tip:

If you press the button for a short moment, the menu with the profiles is shown on the display. If you press one more time, the mobile turns itself off. You can use the up and down cursor keys to scroll and enable a different alert setting.

The 54# Tip:

Type 1#, 2#……..54# on the keypad (when you’re not in the menu) to get the phone number used for with this key when speed dialing.

Free Call Tip:

NB. The tips needs Net Monitor enabled. Be aware that the trick wil remove Net monitor in some Software versions like v4.73, v5.04 and v5.24.

1. Launch the Net Monitor in your Nokia 51xx / 61xx

2. Execute the test number 497

3. Free calling for about 90 sec should now have been activated.

The trick has not been confirmed working yet.

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can’t be erased without restoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the “Headset” menu, you need to short-circuit pins “3″ and “4″. After a short time the word “Headset” will be shown in the display. Menu 3-6 is now enabled.

2. To activate the “Car” menu, you need to short-circuit pins “4″ and “5″. After a short time the word “Car” will be shown in the display. Menu 3-7 is now enabled.

Quick SMS Typing:

When typing SMS messages, you have to wait some seconds before you can type the next letter if it is in the same button than the previous one. For example try to write the word “letter”, you have to wait before you can enter the second “t”.. A much faster solution is to press the # button twice and then the letter “t”.

Share this post: Share this post with the world.

Nokia 5110 Secrets

admin — Fri, 04 Jul 2008 10:57:04 +0000

Nokia 5110 Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

*#0000# To view Software Version.

#746025625# [*#SIM0clock#]

Checks if the SIM clock can be stopped. SIM clock stop is a kind of stand-by mode which will save battery time. This code doesn’t work with software version 4.59.

*#92702689# [*#war0anty#]

You don’t need the warranty-codes any more – you can just scroll through the information like in any other menu. It has the same data as 81xx and 31xx phones (with “Edit” button for purchase date, and “User data transfer”).

Menu:

1: Displays Serial Number.

2: Displays the Month and Year of Manufacture (0997)

3: Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date (Warning: You can only do this once – so be careful what you write…)

4: Displays the date of the last repaired – if found (0000)

6: Does anyone know if this is for upgrading the phone’s EEPROM?? (Transfer user data?)

Enhanced Full Rate Codec (EFR):

On: Enter *3370# and EFR will be activated after a reboot of the phone ( consumes more power )

Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:

On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone ( better standby time )

Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the phone

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (Algebraic Code Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) – Talk-time is reduced with about 5%

Half Rate will give you bad sound quality, which gives the service provider the opportunity to have more calls on the network, and you might get a lower charge from them. – Will give you 30% longer talk-time.

Network Monitor:

There is a hidden menu inside your Nokia phone. If you want to activate it, you’ll have to re-program some chips inside of your phone.

1.Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.

2.Take apart the phone.

3. De-solder the EEPROM (ATMEL AT 24C64).

4. Read out the data with an EEPROM programmer and save it to a file (Backup).

5. If you have v.33 or v4.73, change the address “03B8″ from “00″ to “FF”.

6. If you have v5.24 then change the address “0378″ from “00″ to “FF”.

7. Write the new data to the EEPROM and solder it back to the phone.

8. Power on your phone and you should have “Net Monitor” enabled.

The Network Monitor gives you the following information.

xxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxx

Nokia 5110 Tips And Secrets:

Carrier number

MS RX Level in DBM

Received signal quality

MS TX power level C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.

RTL (Radio link timeout).

Timeslot

Indication of the transmitter status

Information on the Network parameters.

TMSI (Temporary Mobile Subscriber Identity).

Cell identification (Cell ID, Number of cells being used).

MCC (Mobile country code)

MCN (Mobile network code)

LAC (Location area code)

Ciphering (On/Off)

Hopping (On/Off)

DTX (On/Off)

Discard cell barred information.

The Reboot Trick

Should work on all software versions.

1. Go to calendar (menu – 8 )

2. Make note / reminder

3. Enter some text into the edit box

4. Hold clear until whole text is cleared, then press Back

5. Press 0. Main screen is shown but a space appears on the screen. You can’t see it of course.

6. Enter 4 digits (1234, for example)

7. Use the down arrow to move the cursor to the left side of the numbers and the space (2 times down arrow)

8. Now enter 6 digits and press the green “Call button”.

Wait some seconds…the phone will now flash the background light and finally reboot. The trick should also work on other menus like the profile menu…

The James Bond Trick:

Service Provider Lock:

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:

#pw+(master code)+Y#

This code is able to check, activate or remove SIM card restriction (SP-lock).

Use the * key to get the p, + and w chars.

‘Y’ has to be 1,2,3 or 4 – depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status

#pw+1234567890+2# for Network-Lock status

#pw+1234567890+3# for Country-Lock status

#pw+1234567890+4# for SIM Card-Lock status

# = DOUBLE-CROSS

W = PRESS “*” THREE TIMES

P = PRESS “*” FOUR TIMES

+ = PRESS “*” TWO TIMES

MASTERCODE = 1234567890

Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.

(I can NOT give you the master code – SO DON’T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:

#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)

eg. To check if phone if restricted on lock 1 type the following code:

#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it’s only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

xxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxxx

Nokia Mobile 5110 Secrets:

Bypass the Service Provider lock:

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIM Locked to one provider you can bypass the SP lock like this:

1: Insert SIM card of different provider.

2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE?

3: Press the “C” key.

4: Then Press * and wait until it disappear and appear again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again. NOTE: On version 5.04 Nokia has removed this option !

Your number in your display:

1. Go to menu 3-7 Call cost settings.

2. Turn ON the Call costs’ limit 3-7-1. PIN2 code Required.

3. Put in the limit with the phone number. eg. my phone # is 019 2184697 Enter the limit as 2184697

4. Go to menu 3-7-2 Show costs in. PIN2 code Required.

5. Select Currency.

6. Enter Unit price : 1

7. Enter Currency name as 019 (per my phone # eg. above)

Now the phone number 019 2184697 will remains on the 4th row of the display. Secondly, if you press the # key, it prompt which line to be used; Line 1 or 2.

Larger Number Tip (works in 51xx series)

If you hold the key # while you are in the names list, the telephone number can be viewed larger.

Power Button Tip:

Crazy 5110:

Send a SMS full of . (dots) the it’ll go crazy when you scroll the received message in your 5110. It doesn’t do any permanent damage…it only goes crazy if you scroll the SMS. I’m not sure if it works with all of the software version but it works with 4.59. Doesn’t work on SW version 4.53 ..

The 54# Tip:

Type 1#, 2#……..54# on the keypad (when you’re not in the menu) to get the phone number used for with this key when speed dialing.

Revealing the Headphone and Car-Kit menus

1. To activate the “Headset” menu, you need to short-circuit pins “3″ and “4″. After a short time the word “Headset” will be shown in the display. Menu 3-6 is now enabled.

2. To activate the “Car” menu, you need to short-circuit pins “4″ and “5″. After a short time the word “Car” will be shown in the display. Menu 3-7 is now enabled.

Quick SMS Typing: When typing SMS messages, you have to wait some seconds before you can type the next letter if it is in the same button than the previous one. For example try to write the word “letter”, you have to wait before you can enter the second “t”.. A much faster solution is to press the # button twice and then the letter “t”.

Free Call Tip:

NB. The tips needs Net Monitor enabled. Be aware that the trick will remove Net monitor in some Software versions like v4.73 and v5.04.

1. Launch the Net Monitor in your Nokia 51xx / 61xx

2. Execute the test number 497

3. Free calling for about 90 sec should now have been activated.

The trick has not been confirmed working yet.

New Menu on Emergency Calls:

*3001#12345# Brings a new menu that gives you access to the emergency calls ( 911 Etc. ). It will give you FREE calls! (only the ones you put in the emergency!! ) This option will depend on your GSM operator, may be this code will not works and you still can get the bill!

Thats ALL For Nokia 5110 Sets

Share this post: Share this post with the world.

Nokia Mobile Secrets

admin — Fri, 04 Jul 2008 10:35:28 +0000

Nokia 3210 Tips And Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

*#0000# To view Software Version.

*#746025625# [*#sim0clock#]

Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn’t work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.

2. Displays the Month and Year of Manufacture (0997)

3. Displays (if there) the date where the phone was purchased (MMYY)

4. Displays the date of the last repairment – if found (0000)

5. makes you capebel of transferring user data if you have the gear for it

6. shows how many hours the phone has been on

Latest software version: V 05.36 NSE – 8/9 (25-07-00)

V 5.31 NSE – 8/9 (24-05-00)

V 5.26 NSE – 8/9 (07-04-00)

V 5.02 NSE – 8/9

V 4.41 NSE – 8/9 (17-08-99)0

V 4.11 (???)

V 3.10 NSE – 8

*3370# – Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

#3370# – Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*4370# – Half Rate Codec activation. It will automatically restart

#4370# – Half Rate Codec deactivation. It will automatically restart

xx# – xx position in Phone Book

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) – Talk-time is reduced with about 5%

Free SMS Tip:

1st Way:

1. turn our phone off.

2. turn it on and enter your pin.

3. enter *#746025625# 4. now “SIM CLOCK STOP ALLOWED” will be displayed.

now you can send sms for free. if you turn your phone off and later on you have to reenter this code!!!

In some Networks it doesn’t work!!!

2nd Way:

Set Menu 4-3-3 on Usergroup 666 (work with German Networks). It’s now the group 999, but it’s not tested yet.

xxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxx

Nokia 3810 Secrets:

To view IMEI number *#06#

To view Software Version enter *#3810#

xxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxx

Nokia 5610 Secrets:

To view Software Version enter *#9999#

*#92772689# for checking ISDN number.

1) Serial No.

2) Made

3) Programming date

4) Repaired

5) Transfer user data ?

6) Life Timer

*3001#12345# for field test mode and nam selection and some other stuff…

1) NAM 1

a. Home System ID

b. Own Number

c. Alpha Tag

d. PSID/RSID lists

e. Change Defaults

2) NAM 2

a. Home System ID

b. Own Number

c. Alpha Tag

d. PSID/RSID lists

e. Change Defaults

3) Security a. Displays security code

4) Emergency

a. Emergency number 1

b. Emergency number 2

c. Emergency number 3

5) SW Version a. Displays sw version

6) Serial No. a. Displays ESN

7) Programmed

8 ) Field Test

*#639# to change NAM.

Free SMS Tip:

1. turn our phone off.

2. turn it on and enter your pin.

3. enter *#746025625# 4. now “SIM CLOCK STOP ALLOWED” will be displayed.

now you can send sms for free. if you turn your phone off and later on you have to reenter this code!!

xxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxx

Nokia 6080 / 6081 Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# shows the SW version.

Latest software version on 6080 V 4.80 NHE-2

Latest software version on 6081 V 5.14 NHE-2A

Thats ALL, Enjoy !!!!!

Share this post: Share this post with the world.

Nokia 3110 Secrets

admin — Fri, 04 Jul 2008 10:14:03 +0000

Nokia 3110 Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

*#7780# restores Factory Settings..(Memory, language, counters not included)

*#3110# for checking the phone’s software (SW) – called firmware revision information.

#746025625# [*#sim0clock#]

Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn’t work with software version 4.59.

*#92702689# [*#war0anty#]

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture (0997)

7332 (OK) : Displays the date of the last repairment – if found (’DATE NOT SAVED’…)

7832 (OK) : Displays (if found) the date where the phone was purchased (’DATE NOT SAVED’…)

9268 (OK) : Displays Serial Number

37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once – So be careful …)

87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another

Service Provider Lock:

The main code used in Nokia phones is:

#pw+(master code)+Y#

This code is able to check, activate or remove Sim card restriction (SP-lock).

Use the * key to get the p, + and w chars.

‘Y’ has to be 1,2,3 or 4 – depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status

#pw+1234567890+2# for Network-Lock status

#pw+1234567890+3# for Country-Lock status

#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS

W = PRESS “*” THREE TIMES

P = PRESS “*” FOUR TIMES

+ = PRESS “*” TWO TIMES

MASTERCODE = 1234567890

Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.

(I can NOT give you the master code – SO DON’T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:

#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)

eg. To check if phone if restricted on lock 1 type the following code:

#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it’s only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

Bypass the SP lock:

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:

1: Insert sim card of diferent provider.

2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE?

3: Press the “C” key.

4: Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again. NOTE: On version 5.04 Nokia has removed this option !

Fast silent mode:

In the newer versions (v.7.11 or higher) a quick silent mode can by entered. Press Menu then #.

The 54# Tip:

Type 1#, 2#……..54# on the keypad (when you’re not in the menu) to get the phone number used for with this key when speed dialing.

xxxxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxxxxxxx

Nokia Mobile 3110 Tips And Secrets:

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

*#0000# To view Software Version.

*#746025625# [*#sim0clock#]

Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn’t work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.

2. Displays the Month and Year of Manufacture (0997)

3. Displays (if there) the date where the phone was purchased (MMYY)

4. Displays the date of the last repairment – if found (0000)

5. makes you capebel of transferring user data if you have the gear for it

6. shows how many hours the phone has been on

Latest software version: V 05.36 NSE – 8/9 (25-07-00)

V 5.31 NSE – 8/9 (24-05-00)

V 5.26 NSE – 8/9 (07-04-00)

V 5.02 NSE – 8/9

V 4.41 NSE – 8/9 (17-08-99)0

V 4.11 (???)

V 3.10 NSE – 8

*3370# – Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

#3370# – Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*4370# – Half Rate Codec activation. It will automatically restart

#4370# – Half Rate Codec deactivation. It will automatically restart

xx# – xx position in Phone Book

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) – Talk-time is reduced with about 5%

Free SMS Tip:

1st Way:

1. turn our phone off.

2. turn it on and enter your pin.

3. enter *#746025625# 4. now “SIM CLOCK STOP ALLOWED” will be displayed.

now you can send sms for free. if you turn your phone off and later on you have to reenter this code!!!

In some Networks it doesn’t work!!!

2nd Way:

Set Menu 4-3-3 on Usergroup 666 (work with German Networks). It’s now the group 999, but it’s not tested yet.

Thats All

Share this post: Share this post with the world.

Nokia 2170 Secrets

admin — Fri, 04 Jul 2008 09:56:35 +0000

Nokia 2170 Secrets ( continue ) :

Note: When calls are restricted, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency numbers). However, Emergency Key 9 may not operate depending on the type of restriction you choose.

The default setting for this feature is Allowed.

Menu 5 4 2, Restrict international calls

Allowed means you can make international calls and Blocked means you cannot.

The default setting for this feature Allowed.

Menu 5 5, Hide Memory

This feature will prevent your phone from displaying the phone number stored in your personal directory.

To hide numbers in memory

Use Menu 5 5. You’ll need your security code to do this.

To hide only one location, enter the location number at both the Hide from location: and To location: prompts.

To hide a series of locations, such as locations 10-15, enter the first location, for example 10, at Hide from location: and the last location, for example 15, at To location:

Temporary Lists & Call Timers:

Your phone automatically stores the last ten numbers you’ve dialed, numbers of the last ten calls you’ve answered, and the numbers of the last ten calls you missed. It also gives you ten temporary storage places in a “notepad.”

Note: Your phone displays the phone numbers of received and missed calls only if you have subscribed to Caller ID and the wireless system is able to identify the caller.

Menu 01 1, Dialed Numbers

Press and hold CLR to go to the start screen.

Press TALK, then quickly press / or / to scroll the list.

If you want to call any of the other numbers in the list, press TALK while that number is displayed.

To call the first number that appears on your screen, simply wait a few seconds and your phone will dial it automatically.

The top right corner of the display shows the location number of the last dialed number (L0 – L9). Menu 01 1 also accesses the Dialed Numbers list.

Menu 01 2, Answered Calls

Press and hold CLR to go to the start screen.

Press * then / or / to scroll the list.

This shows the calling phone numbers of the ten most recent calls you’ve answered. If the number listed is stored in your personal directory, press ABC to view associated names. Also, you can press Menu 01 2 to access this list.

Menu 01 3, Missed Calls

When you miss a phone call, your phone will display 1 MISSED CALL. Simply press List to view the number. If you wish to view the number later, press Quit.

You can view the number later by using the following step:

Press and hold CLR to go to the start screen.

Quickly press * twice (a + will appear on the display), then press / or / to scroll the list.

This shows you the calling phone numbers of the 10 most recent calls you’ve missed. Menu 013 also accesses the Missed Calls list.

Notepad:

Use the Notepad to store names and numbers that you don’t want stored in your personal directory. The Notepad holds up to 10 names and numbers.

To store numbers and names in notepad:

1. Enter name and number as you normally would, but at STORE IN LOCATION, press #.

2. Press OK.

See “Your Personal Directory” in Faxback Doc. # 48319 for details on storing numbers.

To see numbers and names in notepad

Press and hold CLR to go to the start screen.

Press #, then / or /.

The top right corner of the display shows the location number of the notepad (0 degrees – 9 degrees).

To clear temporary lists and notepad:

Press Menu 01 4.

This clears Dialed Numbers, Answered Calls, Missed Calls, and the notepad. You cannot undo this operation, so be careful!

Menu 01 7, Call Timers

This feature is for those of you who want to keep track of calls for billing purposes. Your phone has separate call timers for each phone number (NAM) your phone uses. This shows call durations for the NAM that is currently selected.

Use Menu 01 7 and press / repeatedly to show durations of LAST CALL. ALL CALLS, HOME AREA CALLS, ROAMING CALLS & LIFE TIMER.

Note: The actual time invoiced for calls by your service provider may vary, depending upon network features, rounding off for billing, and so forth.

To clear Call Timers:

Use Menu 01 7 6 to clear all call timers. You must enter the security code to clear all call timers. Note that the Life Timer, which is a running total of all calls made and received with your phone, cannot be reset.

Share this post: Share this post with the world.

2160-2170 Secrets

admin — Fri, 04 Jul 2008 09:44:16 +0000

Nokia 2160 Secrets:

FIELD TEST:

26. The FIELD TEST MODE is used to investigate how the phone is reacting to the cellular system. The FIELD TEST information covers signal strength, battery charging, cellular state and encryption status. The information is organized to display information relating to Analog Control Channels, Digital Control Channels, Analog Voice Channels and Digital Voice Channels. All the information provided in the FIELD TEST display is in accordance with IS-136.

27. To activate the FIELD TEST mode you must be in NAM programming. Instructions for entering NAM programming are listed above. Use the following steps to enable the FIELD TEST mode.

28. From the main menu use the scroll key to display the “FIELD TEST” menu and press the softkey [SELECT]. Use the key to select ENABLE and press the softkey [OK].

29. Turn the Nokia 2160 off then back on. Once the power up self test is complete, the FIELD TEST display will begin automatically. Scroll through the different displays using the scroll key.

30. To disable the FIELD TEST mode, return to NAM programming and disable the function under the FIELD TEST menu.

PROGRAMMING PSIDS AND RSIDS:

The Nokia 2160 provides the option to program Private (PSIDs) and Residential (RSIDs) System ID’s as prescribed by IS-136. The PSID/RSID list is programmed to support selection/reselection processes, system selection, and SID display functions. Programming the PSID/RSID list is part of the NAM programming menu. All three NAMs have their own PSID/RSID list. Follow these instructions to program the PSID/RSID lists.

1. Enter the NAM programming menu and select NAM 1 (or the desired NAM). (NOTE: PSID/RSID is currently only available in the NAM 1 location. PSID/RSID is included in NAM 2 and 3 for future use.)

2. Use the scroll key to display “PSID/RSID LISTS” and press [SELECT].

3. Use the scroll key to select the P/RSID 1 or the desired P/RSID (1 through 5). Press the [SELECT] softkey.

4. Each list contains:

System type Select Private or Residential system type.

PSID/RSID System ID for the Private or Residential system. Indicates which PSID/RSID the mobile will respond to.

System ID Connected System ID. The SID the PSID/RSID is connected to.

Alpha Tag The name of the Private or Residential SID.

Operator Code(SOC) This is the System Operator code. (US-McCaw Cellular = 001 (dec), Canada-Rogers Cantel Inc. = 002 (dec) and McCaw Cellular Communications (for international) = 2049 (dec).

Country Code Enter the country code of the PSID/RSID.

xxxxxxxxxxxxxxxx Finish xxxxxxxxxxxxxxxxxxx

Nokia 2170 Mobile Secrets:

(170-2213/4) Security

The 170-2213 and the 170-2214 are both the same telephone. The only difference is where they are sold.

Security Code:

Your phone will prompt you for a five-digit security code to enter certain features. The factory default code is 12345, and that is what your phone will accept until it is changed.

If your service provider hasn’t already changed your security code, it’s recommended you have it changed immediately. See “To change your security code (Menu 5 3)” below.

Note: When entering your security code, ** will appear on the display to keep others from viewing your code.

If you make a mistake entering the code,

Erase the incorrect digit by pressing CLR or press and hold CLR to exit the current function.

What if you enter the wrong security code?

You can still enter it again. But if you enter the wrong security code five times in a row, your phone will activate a security timer.

If this happens, your phone will not accept a security code for about five minutes, even if you enter the correct one. You can still use your phone, but any attempts to enter the security code will reset the timer.

Once the timer has elapsed, you may re-enter the correct security code to access security code protected features.

Note: Your phone must remain on during the five minute security timer or the timer will reset for another five minutes.

Menu 5 1, Automatic Phone Lock

When this feature is activated, your phone will be locked every time you switch on your phone. You must enter a four-digit lock code to unlock your phone. Without entering your lock code, you’ll be denied access to almost every memory and menu function.

When your phone is locked, your phone will only receive incoming calls and make outgoing calls to the phone numbers stored in memory locations 2, 3, and 4.

If your phone is locked and you switch your phone off and back on again, you must enter the lock code.

Note: When your phone is locked, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number) including calls with Emergency Key 9.

To enter the lock code

At Enter lock code: enter the lock code and press OK.

Note: Your security code can be entered in place of the lock code when you are asked to enter the lock code.

To answer a call with Auto Lock on

Press TALK.

Can you make calls with Auto Lock on?

Yes. You can call numbers that are stored in memory locations 2, 3, and 4, which are unlocked. To make full use of this feature, you may wish to store your most frequently-dialed numbers in these locations.

To call unlocked memory locations while Auto Lock is on

There are four different ways you can do this:

1. Press and hold CLR to go to the start screen. Press / or / to desired unlocked location, then press TALK.

2. Enter number as it is stored and press TALK.

3. Press desired unlocked location (either 2, 3, or 4) and press TALK.

4. Press and hold the desired unlocked location.

To turn Auto Lock off

Use Menu 5 1 and your lock code.

To change your lock code (Menu 5 2)

You can change your lock code with your phone’s menu. Your default code is set to the last 4 digits of your phone number. In a lock code, only characters 0 to 9 * and # are accepted.

Changing the lock code is simple. Just press Menu 5 2 and follow the prompts to do this. Make sure you have your security code handy. You’ll need it to change the lock code.

Note: Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.

To change your security code (Menu 5 3)

The default security code for your phone is 12345. It’s recommended that you change this code immediately. Just press Menu 5 3 and follow the prompts to do this, and make sure you write the new code down and store it away from your phone.

Menu 5 4, Restrict Calls

This feature allows you to restrict outgoing calls from your phone. You can select the level of restrictions through a series of menu choices.

Menu 5 4 1, Restrict outgoing calls

Allowed means that all calls can be made as usual.

Blocked means that no calls can be made.

Limited means that calls can be made only to phone numbers stored in certain memory locations.

When restricting outgoing calls by selecting Limited, you are prompted for an Allow from location: and To location: value. for example, at Allow from location: enter 1 and To location: enter 15, to allow only calls to the numbers stored in locations 1-15.

Thanks

Share this post: Share this post with the world.